Setting up your Chibi Chip scope

To program your Chibi Chip to print out text, you’ll need to connect the Chibi Scope to your board!

Chibi Scope

When it’s attached, the Chibi Scope, will print out text you’ve programmed to your Chibi Chip. Let’s set it up!

Materials

• 1 Chibi Chip
• 1 Chibi Scope
• 3 crocodile clips

Here’s a Youtube video showing how to setup your Chibi Scope.

Follow the steps are listed here…

Step 1: Attaching GND to GND

• Take one crocodile clip and clamp it on the GND pin located on your Chibi Scope. You’ll find it on the far right of your scope.
• Attach the other end of the crocodile clip to the GND pin located on the top right of your Chibi Chip.

Step 2: Attaching TXT to TXT

• Take another crocodile clip and clamp it on the TXT pin of your Chibi Scope. The pin is on the far left of your scope.
• Attach the other end to the TXT pin located on the top left of your Chibi Chip.

Step 3: Attaching +5V to +5V

• Using one more crocodile clip, find the +5V pin on your scope. It’s between TXT and GND pins. Attach the crocodile clip. Clamp!
• Find the +5V on your Chibi Chip (in between TXT and GND), attach the other end of your crocodile clip.